Models in series 3500 vertical precision diamond wire saws

  • 3500 premium
  • 3500 base
  • 3500

The WELL 3500 wire saw is a versatile model commonly used in laboratories. The cut is made by the movement of the wire on a workpiece that is bonded or clamped to a fixed support. This feed is automatically achieved by gravity. The pressure exerted by the cutting tool (the diamond wire) on the sample is adjustable. The feed speed is determined by the resistance of the material, which is thus not subjected to mechanical stress.

Operation of the WELL 3500 diamond wire saw

The grooved table enables the adaptation of different types of sample holders and accessories for precise positioning of the sample (micrometer table, vices, goniometers, dividers, bonding media, USB / WIFI microscope, etc.).
To adapt the useful length of the diamond wire according to the workpiece, the work area can be modified by moving the tensioner pulley.

  • Vertical wire
  • Adjustable wire speed
  • Automatic saw shut off at the end of cutting or in case of wire breakage
  • Designed for use with cutting fluid
  • Ergonomic
  • Very easy access to the most important components
  • Easy to use
  • Long duration thanks to perfect design and workmanship
  • Long service life before maintenance
  • 12-month warranty

Premium model

This model has been designed to satisfy numerous demands from users.

The WELL 3500 “Premium” wire saw is identical to the 3500 “Base” saw, but accepts a series of additional accessories. Thanks to these, visualisation of the cutting point is significantly improved because the sample is located inside the wire loop. With the wire as a reference before the start of the cut, the sample can be rotated, repositioned by 90° or moved laterally (x-axis) with precision. In this way, the cut can be precisely targeted at the desired point.

The 3500 “Premium” model allows the workpiece to be placed inside the diamond wire loop. This feature allows you to precisely observe the positioning of the workpiece as well as the cutting process. An adjustable electronic stop function informs the unit when the desired cut depth is reached: the motor then stops automatically.

The saw can be fitted with a USB / WIFI 10x to 140x microscope to accurately visualise the cutting point.

Operation of the WELL 3500 “Premium” diamond wire saw

The cut is made by the movement of the wire on a workpiece that is bonded or clamped to a fixed support. This feed is automatically achieved by gravity. The pressure exerted by the cutting tool (the diamond wire) on the sample is adjustable. The feed speed is determined by the resistance of the material, which is thus not subjected to mechanical stress.
The grooved table allows the adaptation of different types of sample holders and accessories for precise positioning of the sample (vices, goniometers, dividers, bonding media, USB / WIFI microscope, etc.). It also allows the operator to position the sample in both axes while the sample holder rotates 360° for proper orientation of the appropriate cutting axis. The 3500 “Premium” model enables the operator to position the sample inside the wire loop, thus providing an unobstructed view for positioning and monitoring the cut in progress. In addition, two micrometers are provided as standard on this version – one for precise sample positioning, the other to adjust the depth of a slice or cut. An adjustable electric limit switch informs the unit when the desired depth of cut is achieved and the motor stops automatically.

Advantages of the 3500 “Premium” diamond wire saw

  • Vertical wire, versatile model
  • Automatic linear feed (60 mm) by gravity
  • Adaptable work area height (from 10 to 60 mm)
  • Variable wire speed
  • Automatic stop at the end of the cut
  • Low-volume cleaning tray
  • Optimal positioning of the sample
  • Easy handling
  • Visualisation of the cutting point
  • Low maintenance
  • Commonly used in laboratories
3500 “Premium” model
Article No.: 35.P.000
W x W x H : 410 mm x 345 mm x 460 mm,
Weight : 13,8 kg

  • Ø of the wire and grain :
    Ø 0,13 mm – 10 mµ, 20 mµ
    Ø 0,17 mm – 20 mµ, 30 mµ
    Ø 0,22 mm – 20 mµ, 30 mµ, 40 mµ
    Ø 0,30 mm – 20 mµ, 30 mµ, 40 mµ, 60 mµ

Available lengths: 60 m and 120 m

Other lengths on request


Base model

For the 3500 “Base” model, a grooved table forms the base on which samples are attached, which can be achieved by various methods. The sawing mechanism is fixed on a precise guide and moves by gravity against the sample through the inclination of the base of the machine (horizontal frame). The feed function is thus provided simply and reliably, in the form of a variable pressure force.

The work area, which is identified by several colours, adapts to the size of the sample, between the axes of the pulley and drum. The saw can thus be used optimally.
Larger samples can also be cut, since they are placed outside the loop. The USB / WIFI microscope cannot be installed on this version.

The advantages of the WELL 3500 “Premium” diamond wire saw

  • Vertical wire, versatile model
  • Automatic linear feed (60 mm) by gravity
  • Adaptable work area height (from 10 to 85 mm)
  • Variable wire speed
  • Automatic stop at the end of the cut
  • Low-volume cleaning tray
  • Easy handling
  • Low maintenance
  • Commonly used in laboratories
3500 “Base” model
Article No.: 35.B.000
W x L x H: 410 mm x 345 mm x 460 mm,
Weight: 13,8 kg

  • Ø of the wire and grain :
    Ø 0,13 mm – 10 mµ, 20 mµ
    Ø 0,17 mm – 20 mµ, 30 mµ
    Ø 0,22 mm – 20 mµ, 30 mµ, 40 mµ
    Ø 0,30 mm – 20 mµ, 30 mµ, 40 mµ, 60 mµ

Available lengths : 60 m and 120 m

Other lengths on request


WELL 3500 “NC” Automatic Diamond Wire Saw

The WELL 3500 “NC” diamond saw is equipped with a table with programmable movement and automatic cutting feed. Its user-friendly interface makes it easy to program.

Parameters of the WELL 3500 “NC” saw

  • Enter the diameter of the wire, the width of the cuts and the number of cuts.
  • Repetitive cuts or cuts in series on standard WELL supports or on a mini-palletisation system on request.

Specifications of the WELL 3500 “NC” diamond saw

  • L x W x H: 600 x500x500 mm
  • Weight: 40 kg